What we offer
What is included
Pilot and thermocouple service
Burner cleaning
Venting inspection
Carbon monoxide test
Direct vent wall furnace replacement
Upgrade options to heat pumps
Before you call
Quick checks you can do yourself
- Set the thermostat to Heat, a few degrees above room temperature.
- Replace the furnace filter if it is dirty.
- Make sure the furnace door is closed tightly; a loose panel keeps it from starting.
- Check the furnace power switch (looks like a light switch) and its breaker.
- If you smell gas, do not touch anything: leave the house and call SoCalGas or 911.
Still not working? Call (323) 240-2373 or tap "Call me back". Do not open electrical panels or touch gas parts.
Troubleshooting guides
Common problems, explained
Troubleshooting
Furnace Blowing Cold Air? 7 Causes and What to Check
A furnace that blows cold air is often just set to fan On instead of Auto, or the burners shut off after a few seconds because of a dirty flame sensor, a clogged filter, or an ignition problem. Check the thermostat and filter first. If the burners do not light or keep shutting off, call a technician.
Read the guideTroubleshooting
Furnace Turns On Then Shuts Off? Short Cycling Causes
A furnace that turns on and shuts off quickly is short cycling, usually because of a clogged filter causing overheating, a dirty flame sensor, a blocked vent or intake, or a thermostat problem. Replace the filter and check the thermostat first. If it keeps cycling, a technician should check the safety switches and venting.
Read the guideTroubleshooting
Heat Pump Blowing Cold Air in Heat Mode? Causes
A heat pump that blows cool air in heat mode may simply be in defrost mode, which is normal and lasts a few minutes. If it blows cold air for a long time, check the thermostat mode and filter, then call a technician for possible reversing valve, defrost control, or refrigerant leak problems.
Read the guideWall & Floor Heaters in Santa Clarita & Orange County
WY&G, Inc. provides wall & floor heaters for homes and light commercial buildings in Santa Clarita, Valencia, Saugus, Canyon Country, Newhall, Stevenson Ranch, Castaic and the north San Fernando Valley, and across Orange County from Tustin and Irvine to San Clemente. Repair and replacement of wall furnaces, floor furnaces and direct vent heaters. Every visit starts with a diagnostic and a written price, and our licensed technicians (CSLB C-20 #1044922) explain what they found in plain language.
Wall & Floor Heaters by city
Stages
Wall & Floor Heaters: how it works, step by step
Simple, clear and on your schedule.
Submit a requestStage 1
01Request
You call or send a request. We confirm the problem and set a time, usually the same day.
Stage 2
02On-site visit
The technician tests the system: electrical, refrigerant or gas, airflow and drain.
Stage 3
03Written estimate
You get a written diagnosis and price before any work starts.
Stage 4
04Service
We repair with quality parts and keep the work area clean.
Stage 5
05Support
We test performance, explain what we found and how to avoid it next time.
Tip
Common problems and what they mean
Pilot will not stay lit
Usually the thermocouple. A common repair.
Yellow, lazy flame
Needs service. Do not keep running it.
Old floor furnace
Can be repaired, but we check it closely for safety.
Want something better
A direct vent wall furnace or ductless heat pump.
Pro tip
Wall and floor heaters are common in older Newhall, Sylmar and San Fernando homes. Have them checked every fall.
Related
More heating services
Ductless Mini-Split Installation
Quiet, efficient heating and cooling for rooms without ducts: additions, garages, bedrooms.
Get details
Heat Pump Installation
One system for cooling and heating. Repair, replacement and conversion from gas furnaces.
Get details
Rooftop Package Unit Repair
Repair and replacement of rooftop and ground package units and gas packs.
Get details
Zoning Systems
Separate temperatures for upstairs and downstairs with dampers and multiple thermostats.
Get detailsReviews
Reviews from our customers
WY&G is very reliable and professional. They were assigned by the warranty company and did excellent work. Same day fixed the problem and finished the work. Strongly recommends WY&G Inc for all AC repair or regular maintenance work for HVAC.
Canyon Country, CAWe’re very happy with WY&G services. We had our old heater & AC replaced in our unit. The tech guys are professional and provide high quality services. Definitely recommend if you want to upgrade your system. The crew worked smoothly and cleaned up after work.
Studio City, CAI don’t have enough good things to say about WY&G. They are professional, fast, and do quality work. I had a lengthy issue that required working with a home warranty and manufacturer’s warranty that WY&G was able to help me resolve. They are great with communicating and always called me back promptly. I will definitely be using them again.
Sherman Oaks, CAFAQ
Frequently asked questions
Do you repair floor furnaces?+
Yes, including older models.
Can I replace a wall heater with AC and heat?+
Yes, a ductless heat pump does both.
Do you work in apartments?+
Yes, for owners and property managers.
Is my heater safe?+
We test it and tell you plainly.
Licensed, insured C-20 HVAC contractor
All major brands
Our own team, no middlemen
Written price before work begins
Help with home warranty claims
Support after every repair and install
Consultation
Get a free quote and consultation
Send a quick request and we will call you back fast.
- A clear written estimate
- Help choosing the right system
- Straight answers to your questions
